2017-08 11
The blower mainly consists of the following six parts: motor, air filter, blower body, air chamber, base (and tank), drip nozzle. The blower relies on the eccentric rotation of the eccentric rotor in ...
[detail]
2017-08 11
Rotor: shaft, impeller, bearing, synchronous gear, coupling, shaft sleeve, etc.Impeller: choose involute face with high volume utilization.Bearing: the close coupler end USES 3000 type double column c...
[detail]
2017-08 11
According to the wind of subsectionAccording to the pressure of the fan, the fan can be divided into low-pressure fan, medium pressure fan and high pressure fan.Air blowerAir blowerThe pressure range ...
[detail]
2017-08 11
Because impeller is running in the body without friction, do not need lubrication,Air blowerAir blowerThe exhaust gas is not oily. Is chemical industry, food and other industrial ideal pneumatic conve...
[detail]
2017-08 11
Fan, blow tube and skin sac, first used to force the wind instrumentWater modelWater modelIts a fan and a blowpipe. The ancient Egyptian goldsmiths had used a blowpipe with a windpipe, and the Inca so...
[detail]
2017-08 11
Dc blower is through the direct current (dc), is converted into mechanical energy, drive the rotor rotation, the inlet and outlet in the vertical direction, constantly compressed air, make its produce...
[detail]
2017-08 11
Widely used in computers, communication products, photoelectric products, consumer electronics, automotive electronics equipment, switches, medical devices, heaters, air conditioners, frequency conver...
[detail]
2017-08 11
Air volumeAir volume refers to the total volume of air released or incorporated by the cooling fan per minute. If measured in cubic feet, the air volume unit is CFM; And if you do it in cubic meters, ...
[detail]
2017-08 11
profileThe common bearings of the cooling fan are: ball bearing, oil bearing, magnetic suspension bearing.Ball bearingBall Bearing changes the friction mode of the Bearing, and USES rolling friction. ...
[detail]